×

新导航介绍,点击查看

why Iron shot five basic principles(3)

发表日期:2011-06-14 摄影器材: 点击数: 投票数:

'Under the stem/pole'
The key is on stem body's centre of gravity correct transferred to the right side of the body (rear), avoid on pole course and finish stem body gravity body when the left stranded in the torsional axis (often said flip). In the process, have a bit need clearly understood, the correct barycenter is the result of body full rather than turning around and the body of sliding. Therefore,ping k15 irons, in turn, turn again pole process until focus on his right foot, his hands away from the body in the trunk,taylormade r7 cgb max fairway wood, pole to vertex place. Right on cue up pole and, then a need special attention on the key point is reached after the pole vertex's place. If in the downhill, the greater the need to be more careful to avoid during next rod caused bad chain reaction.
In the bar the upper body vertex place, I have turned away from goal direction and most of the body weight has been transferred to the right foot. The head and left shoulder has also turned to behind the ball, it is further proof of my body gravity, has shifted to the right to stem the transition - the next stem ready for it. Finally, watch the vertex place my rod surface, is not difficult to discover it is facing you, it reached the pole vertex needed after the formation of state. From this location began, the body is ready to turn body gravity target direction,ping g15 driver, turned to the process of left hands on natural regen to below the head position. The chain reaction on the process is also the release of energy that shot the deposition process.
'Shot'
Now is the moment. Inspection swing All the chain action before hitting the ultimate goal is to realize the outbreak of ball moments. At this time, from the body of each place state can also foresee you hit the situation. In place of the body form so-called ball posture 'for karzai' stack stability ball plays a very key role, many excellent golfers are capable of that way. This pose refers to the left wrist released altogether, left arm and clubs in a straight line, like a partially overlap each other to another. Before the ball of the weight, the body has shifted to the front, plus the solid body came up with the left arm and physical power generated by the driver, he had to in golf wrist above launch, addressed and released in full. Many amateur golfer in hitting a position place often entities misconception is: hit body position should reproduce the throne preparation aim ball posture. In their view, the throne all aim ball factors are perfectly set good, so stance should aim is the same with the ball, is it true? Wrong. From the graph can be seen, the stance toward the right side of the body open at hip,ping g15 irons, body weight foreleg has shifted to the right shoulder significantly below, left shoulder. This powerful dynamic posture and static balance throne scans the ball is a big difference between pose obvious.
Ball down radian
Different, with no. 1 fan club head edged up in its radian should not be on shot. Many iron shot require stem head in decline swing,callaway diablo edge driver, which means complete radian, stem head after hitting arrived at the lowest point. Swing radian If you try to play thick or thin, can use in the stem process curve wrist to moments ahead of narrow swing,taylormade burner superFast 2.0 driver, realize the sound of shots radian, especially when choosing short iron. Choose long iron, then try rod process slightly slow curve, this can effectively wrist movements broaden swing radian, better adapt to the needs of the long iron.
release
Head behind the ball to the right side of the body, hip, arm and left leg and open in golf pole body in the above physical condition, such cascade place need. It is shot.

作者:uhindsv46

《why Iron shot five basic principles(3)》


下一篇:没有了

最 新:
没有其它新的作品了

更多uhindsv46的POCO作品...

评论